Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
1
/
of
1
Ubiquiti Ethernet Surge Protector Version 2.0 (ETH-SP-G2)
Ubiquiti Ethernet Surge Protector Version 2.0 (ETH-SP-G2)
Ubiquiti Ethernet Surge Protector Version 2.0
The ETH-SP is engineered to protect any Power over Ethernet (PoE) or non PoE device with connection speeds of up to 1 Gbps.
ESD Protection for Outdoor PoE Devices
Damaging electrostatic discharge attacks and surges are diverted to the ETH-SP and safely discharged into the ground, so network devices are protected.
Additional ESD Protection
All Ubiquiti ® airMAX ® devices are equipped with built-in ESD protection, so the ETH SP adds another layer of protection to your outdoor, high-speed network.
Plug and Play Installation
Connect the ground and Ethernet cables in between your network devices.
SPECIFICATIONS:
Dimensions |
91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28") |
Weight |
80 g (2.82 oz) |
Interface Connections |
(2) RJ45 Female Connectors |
ESD/EMP Protection |
Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/ µs |
DC Spark-Over Voltage |
90V @ 100V/s |
Maximum Impulse Spark-over Voltage |
700V @ 1kV/ µs |
Discharge Current |
5kA (Maximum) 0.5kA (Normal) |
Maximum Insulation Resistance |
1G ohm @ 50V |
Maximum Capacitance |
1.0 pF @ 1 MHz |
Data Line Protection |
RJ45 10/100/1000 Ethernet |
IEEE 802.3af PoE Support |
Yes |
Shock and Vibration Certification |
ETSI300-019-1.4 Standard |
Operating Temperature |
30 to 65 ° C (-22 to 149 ° F) |
Operating Humidity |
10 to 90% Noncondensing |
Couldn't load pickup availability
Activate your membership
Bidding is a Trendy Deals member perk. Activate your membership to place a bid on this lot.
Invalid password
Enter
